We are working to fit all buses with bike racks. As of 2019, bike racks are fitted to almost 350 of our regular sized and articulated buses. We purchase approximately 50 new buses each year, and every new bus has a bike rack installed. Shuttle buses do not have bike racks at this time.
Buses with bike racks are scheduled to operate on routes 1, 9, 14, 20, 38, 43, Max Orange and Max Teal for all 7 days. However, if there are breakdowns or operational issues (especially in winter), there may be occasions where these services are without a bike rack.
Folding bikes are permitted inside the bus, provided they are folded and are not obstructing other passengers.
Cost
There is no additional cost to use a bike rack on the bus
Capacity
There is space for 2 bikes on the bike racks and available on a first come first served basis. Bikes are not allowed inside the bus, so if the racks are full, please wait for the next bus.
Specifications
Most regular bikes will fit on the racks. Both wheels must fit into the bike rack wheel slots and the support arm/hook must fit over the top of the bike wheel (fenders ok).
- Max Tire Width: 2.3”/5.8cm
- Max Wheelbase: 44”/111cm
- Wheel Diameter: 20”-29”/50cm-73cm
- Max Weight: 55lbs/24kg
Electric bikes are accepted provided they do not exceed the weight limit (55lbs), both tires drop fully into pockets and the support arm can be positioned properly. Gas or diesel operated vehicles are not permitted either. Calgary Transit is not responsible for damage caused by or to bicycles on the buses.
How to use a bike rack
- Remove any items from your bike that could fall off or block the driver’s view.
- Wait until the bus comes to a complete stop and signal to the operator you are going to load your bike. The operator will kneel the bus to make it easier for you to lift the bike onto the rack.
- Allow room (an arm’s length) between the rack and your body. While supporting your bike with one hand, use the other to squeeze the handle and lower the rack. Be sure to lower the rack completely.
- Place your bike into the closest available bracket to the bus, with the front wheel facing the direction indicated.
- With one hand steady on the bike, pull the holder hook and lift it over the front tire, securing the hook as close to the bike frame as possible. Your bike is now secure!
- Let your operator know where you will be getting off and plan to exit using the front door.
- If the bike rack is empty after unloading your bike, return the rack to the upright position.
- For your safety, always take your bike to the curb before continuing your journey, rather than riding immediately into traffic.